特点:
装入筒夹和更换刀具,必须把螺帽和本体螺纹清理干净,并添加润滑脂,否则会造成螺纹损坏
装置时筒夹必须先置入螺帽,再切入刀具,接着锁固本体
mm
订货编号 | L | L1 | L2 | D | d(夹持范围) | |
CAT40 | ER16-2.76” | 5.447” | 2.76” | 2.01” | 1.102” | 1/32-3/8 |
ER16-4.0” | 6.687” | 4.0” | 3.25” | 1.102” | 1/32-3/8 | |
ER20-2.76” | 5.447” | 2.76” | 2.01” | 1.338” | 1/16-1/2 | |
ER20-4.0” | 6.687” | 4.0” | 3.25” | 1.338” | 1/16-1/2 | |
ER25-2.76” | 5.447” | 2.76” | 2.01” | 1.653” | 1/16-5/8 | |
ER25-4.0” | 6.687” | 4.0” | 3.25” | 1.653” | 1/16-5/8 | |
ER32-2.76” | 5.447” | 2.76” | 2.01” | 1.968” | 3/32-25/32 | |
ER32-4.0” | 6.687” | 4.0” | 3.25” | 1.968” | 3/32-25/32 | |
ER40-4.0” | 6.687” | 4.0” | 3.25” | 2.48” | 3/32-1 | |
CAT50 | ER16-4.0” | 8.0” | 4.0” | 3.25” | 1.102” | 1/32-3/8 |
ER20-4.0” | 8.0” | 4.0” | 3.25” | 1.338” | 1/16-1/2 | |
ER25-4.0” | 8.0” | 4.0” | 3.25” | 1.653” | 1/16-5/8 | |
ER32-4.0” | 8.0” | 4.0” | 3.25” | 1.968” | 3/32-25/32 | |
ER40-4.0” | 8.0” | 4.0” | 3.25” | 2.48” | 3/32-1 |