![](/skin/images/logo.jpg)
Features:
The face milling cutter with parts(d) shaft tolerance h6
mm
Model No. | L | L1 | L2 | L3 | d | D | k | w | |
BT30 | FMA25.4-60 | 128.4 | 60 | 38 | 20 | 25.4 | 50 | 4.52 | 9.52 |
BT40 | FMA25.4-60 | 145.4 | 60 | 33 | 20 | 25.4 | 50 | 4.52 | 9.52 |
FMA31.75-60 | 147.4 | 60 | 33 | 22 | 31.75 | 60 | 6.7 | 12.7 | |
FMA38.1-60 | 150.4 | 60 | 33 | 25 | 38.1 | 73 | 8.87 | 15.87 | |
BT50 | FMA25.4-60 | 181.8 | 60 | 22 | 20 | 25.4 | 50 | 4.52 | 9.52 |
FMA25.4-100 | 241.8 | 100 | 62 | 20 | 25.4 | 50 | 4.52 | 9.52 | |
FMA25.4-150 | 291.8 | 150 | 112 | 20 | 25.4 | 50 | 4.52 | 9.52 | |
FMA31.75-60 | 183.8 | 60 | 22 | 22 | 31.75 | 60 | 6.7 | 12.7 | |
FMA31.75-100 | 243.8 | 100 | 62 | 22 | 31.75 | 60 | 6.7 | 12.7 | |
FMA31.75-150 | 293.8 | 150 | 112 | 22 | 31.75 | 60 | 6.7 | 12.7 | |
FMA38.1-60 | 186.8 | 60 | 22 | 25 | 38.1 | 80 | 8.87 | 15.87 | |
FMA38.1-100 | 246.8 | 100 | 62 | 25 | 38.1 | 80 | 8.87 | 15.87 | |
FMA50.8-75 | 212.8 | 75 | 37 | 36 | 50.8 | 98 | 9.75 | 19.05 | |
FMA47.625-75 | 201.8 | 75 | 37 | 25 | 47.625 | 128.75 | 12.5 | 25.4 |