![](/skin/images/logo.jpg)
Features:
Collet and replacement of cutting tools, screw nut and body must be clean, and add grease. Otherwise, it will cause damage to the thread.
The device must be placed in the collet nut, and then into the tool,finally lock the body
The collet chuck should place into the hole, and exceed effective length, aims at avoiding improper locking damage.
mm
Model No. | L | L1 | L2 | D | d(Clamping range) | |
HSK63F | ER16-75 | 95 | 70 | 44 | 28 | 1~10 |
ER16-100 | 125 | 100 | 74 | 28 | 1~10 | |
ER20-75 | 95 | 70 | 44 | 34 | 1~13 | |
ER20-100 | 125 | 100 | 74 | 34 | 1~13 | |
ER25-75 | 95 | 70 | 44 | 42 | 3~16 | |
ER25-100 | 125 | 100 | 74 | 42 | 3~16 | |
ER32-80 | 105 | 80 | 54 | 50 | 3~20 | |
ER32-100 | 125 | 100 | 74 | 50 | 3~20 | |
ER40-80 | 105 | 80 | 54 | 63 | 3~26 | |
ER40-100 | 125 | 100 | 74 | 63 | 3~26 |